Cleaning Side Brushes
1 .Make sure side brushes are not damaged and no foreign matter among
them.
2. Use cleaning kit or cloth to clean side brushes.
3. Remove side brushed and put them in warm water for five seconds can
solve side brushes tangling and deformation.
4. Replace side brushes when they are worn.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each use following the steps as shown
in the figures below.
a. Wash the HEPA and primary filter after used for 15~30 days. Max life span for HEPA
and primary filter is 24 months.
b. Reinstall the HEPA and primary filter after they are fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under baking sunshine.
Product Maintenance
Take out the dust bin.
Take out the HEPA.
Open dust bin cover,
take cut primary filter. Empty the dust bin.
Wash dust bin and filter,
clean the HEPA with brush.
Install the primary filter and
HEPA back into the dust bin.
Note:
21
To Next Page
Loading...
