Cleaning Sensors and Wheels
Slightly wipe all the sensors and wheels, as marked in figure below, with soft
cleaning cloth or tool.
Cleaning Charging Poles
Clean the charging poles, as marked in figure below, with soft cleaning cloth
or tool.
Cleaning Suction Passage and
Spot Cleaning Sensors
Remove suction passage kit from main body. Clean the suction passage and
dust sensors, as marked in figure below, with soft cleaning cloth or tool.
Note: Avoid allowing the sensors to get wet by water, thinner, etc.
Clean the charging poles with
soft dry cloth when there is
bad contact.
Clean the charging poles with
soft dry cloth when there is
bad contact.
22
To Next Page
Loading...
