ProTec Polymer Processing FG 206 - Commissioning Process; System Startup and Verification

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
7
1.3 Model plates and serial number
Model plate with information for device
1.4 Warranty
Exclusively use original replacement parts from ProTec Polymer Processing GmbH.
Independent modifications or add-ons and the use of replacement parts that are not approved by
ProTec Polymer Processing GmbH lead to the loss of warranty and guarantee. The illustrations
in this operating manual can deviate from the actual design. This does not affect informational
content and facts.
1
Device description and series
2
Consecutive serial number and year of manufacture
3
Component number/ order number / possible
position number in the order
4
Data on power connection