ProTec Polymer Processing FG 206 - Safety Labelling and Meanings

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
9
2.1.2 Safety labelling and meanings
The meaning of safety labels is indicated by their shape and colour.
Shape
Colour
Meaning
Safety colour red
Contrast colour white
Prohibited
Safety colour yellow
Contrast colour black
Warning
Safety colour blue
Contrast colour white
Order
The following symbols are used in the manual:
Symbol
Description
Symbol
Description
Symbol
Description
Warning!
Follow
information!
Caution!
Fine dust:
Wear breathing
protection!
Caution! Danger!
Disconnect device
from power!
Danger!
Electric
current!
Danger to life!
Danger of injury!
Hot!
Do not touch!
Caution!
Damages to the
equipment
possible.
 Only open or remove protective and safety equipment for service work. Before
commissioning, these must be remounted / repowered.
 Systems and units must be depressurised before opening.
 Comply with maintenance and service intervals!
 Keep all safety instructions and hazard warnings on the equipment complete and legible!
 Carry out daily visual inspections for outwardly recognisable damage and deficiency!
Immediately report any changes that occur (including the operating behaviour) to the
responsible department/ person! In the case of functional faults the equipment must be
immediately shut down and secured! Malfunctions should be immediately remedied.