Protec PLM-8000 - Device Description; Component Configuration

PLM-8000 Operation Manual
6
4. Description
4.1 Configuration
Name
Function
1. LCD Display
7.0 inch TFT Color LCD Monitor, Touch
2. Lens retainer
To fix the lens
3. Lens holder
Measure the lens when the lens is fixed on the lens holder. This
is the basis for measurements
When measuring contact lenses, replace them with the supplied
contact lens holder
4. Read button
To read measured data
5. UV, Blue cover
For UV / Blue transmittance measurements
6. Marking lever
Mark a lens by pushing the lever down
7. Table lever
Move the lens table forward and backward
8. Lens table
Touched the eye glasses frame
9. Printer
Printing the measurement data
10. Ready LED
The LED is illuminated in the direction of the lens being measured
When measuring a single lens, all LEDs are off.
When in the power save mode, it blinks every 5 seconds.