Protec PLM-8000 - Replacing Ink Cartridge; Cleaning the Device

PLM-8000 Operation Manual
27
(4) Press the right and left sides of the printer cover to
close the printer.
CAUTION
Be careful not to touch the printer head inside the device.
6.3 Replacing Ink cartridge
(1) Remove the c-ring with tweezers.
(2) Remove the ink cartridge.
Ink cartridge
C-ring
(3) Insert the spring into the holder.
(4) Insert the new Ink cartridge into the holder.
Ink cartridge
Spring
(5) Set the c-ring again.
C-ring
6.4 Cleaning the device
(1) Basically keep the instrument clean. Do not use highly volatile materials, such as
thinner, benzene, etc.
(2) Sprinkle a little liquid soap on soft cloth, squeeze the water from the soft cloth, and
clean the parts of the instrument.