Protec PLM-8000 - Storage after Use

PLM-8000 Operation Manual
9
4.3.3 Storage after use
(1) When the PLM-8000 is not used for a long time, please turn off the power and
disconnect the power cord from the power outlet.
(2) Clean with soft cloth.
(3) Clean the cover glass’s dusts by wind blower and soft cloth.
(4) Put the dust cover.
(5) Do store at the following place
- A non-humid place
- A flat place
- Where vibration or shock is not applied
- Not in the vicinity of other flammables vapors or liquids
- Not in the vicinity of direct sunlight
(6) Store the accessories and cords for next operation
NOTE
In storage Temperature : -10℃ ~ +55℃
Humidity : 10% ~ 95% RH
Pressure : 70 ~ 106 kPa