PLM-8000 Operation Manual
14
4.4.5 User Setup display
User mode is provided as Touch Screen for users to set-up directly.
(1) STEP
① 0.25 : Display step, 0.25 step
② 0.125 : Display step, 0.125 step
③ 0.06 : Display step, 0.06 step
④ 0.01 : Display step, 0.01 step
(2) CYLINDER
① - : The cylinder reading direction to “-”.
② + : The cylinder reading direction to “+”.
③ MIX : The cylinder reading direction to “+” or “-”.
(3) PRISM
① OFF : No prism display.
② DEGREE : Polar coordinates.
③ BU/D, BI/O: Rectangular coordinates.
(4) Abbe Select (This can be applied to the high-refractive lens.)
① NORMAL : Designated value for NORMAL ABBE(= 50 ~ 60)
② MID : Designated value for MID ABBE(=40~49)
③ LOW : Designated value for LOW ABBE(=30~39)
(5) Wavelength
① e-line : Display the refractive power according to e-line
② d-line : Display the refractive power according to d-line
To Next Page
Loading...