Protec PLM-8000 - Measuring UV and Blue Transmission; Measuring Prismatic Lenses; Measuring PD and OH

To Next Page

To Previous Page

PLM-8000 Operation Manual

(6) Init Screen

① Auto

When the lens on the lens holder is detected as a progressive addition lens, the

normal measurement screen changes to the PAL measurement screen

automatically.

 When the distance portion of a PAL is placed on the lens holder, it is not

detected as a PAL

 In such a case, put the intermediate portion(progressive zone) or near portion

area on the lens holder

② Normal : Normal lenses mode

③ Prog : Prograssive lenses mode

④ UV/BLUE : UV / BLUE lenses mode

(7) Nor Auto Read

① OFF : Enable automatic measurement.

② ON : Disable automatic measurement.

☞ Only Using Normal lenses mode.

(8) Far Auto Read

① OFF : Disabling the auto read function for the far portion in measurement of

progressive lenses.

② ON : Enabling the auto read function for the far portion in measurement of

progressive lenses.

(9) Near Auto Read

① OFF : Disabling the auto read function for the near portion in measurement of

progressive lenses.

② ON : Enabling the auto read function for the near portion in measurement of

progressive lenses.

(10) AUTO R/L

① OFF S/R/L : Disable automatic transfer function in case of left/right lens

measurement. Initial screen stands by for single lens measurement.