Protec PRS 500 E - Control Elements and Device Displays Collimator; Control Elements and Device Displays of X-Ray Tube; Control Elements and Device Displays of X-Ray Generator; Control Elements of Bucky, Grid Entity

PRS 500 E
User Manual
5069
-
0
-
8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
20
von
39
3.3 Control elements and device displays collimator
Figure collimator, may differ depending on the system.
Pos. 1 -> Collimator adjustment control; allows for manual opening and closing of collimator shutters
(transversely to table top).
Pos. 2 -> Scales; indicate the opening of collimator shutters (transversely to table top).
Pos. 3 ->Accessory rails (can be used for measuring phantoms).
Pos. 4 -> Light resp. X-ray field; corresponding to opening of collimator shutters.
Pos. 5 -> Light centering device; allows centering of the X-ray tube assembly with the Bucky unit.
Pos. 6 –> Filter control for selection of additional filtration.
Pos. 7 -> Collimator adjustment control; allows for manual opening and closing of collimator shutter
(longitudinally to table top).
Pos. 8 -> Scales; indicate the opening of collimator shutters (longitudinally to table top).
Pos. 9 -> Collimator light switch; turns on collimator light.
Pos. 10 -> Measuring tape.
Detailed information please find in the enclosed User Manual collimator.
3.4 Control elements and device displays of X-ray tube
Detailed information please find in the enclosed User Manual of the X-ray tube.
3.5 Control elements and device displays of X-ray generator
Detailed information please find in the enclosed User Manual of the X-ray generator.
3.6 Control elements of Bucky, Grid entity
Detailed information please find in the enclosed User Manual.
1
2
3
4/5
9
6
7
8
10