Protec PRS 500 E - Technical Data; Dimensions

39 pages

Save Page as PDF

To Next Page

To Previous Page

PRS 500 E

User Manual

5069

8002

PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany

von

Technical Data

7.1 Dimensions

PATIENT

OP*

Main Page

Table of Contents3
Document Effectivity6
General Notes7
Mechanical - Electric Warning7
Radiation Warning7
To the User8
Product Description9
Introduction9
Description9
Equipment Components9
Installation9
Floor Capacity10
Product Specific Characteristics10
Variable Height Radiographic Table10
Floor Railed X-Ray System Tube Support10
Vertical X-Ray System Image Receptor Stand10
Intended Use10
Indication and Contraindication11
Indications11
Contra Indications11
Intended User Group11
Conformity12
Safety Instructions13
General Safety Notice15
Requirements for Operation15
Operating of the Radiographic System15
Operating Type15
Operating Personnel15
Pinching and Collision Hazards16
Explosion Protection16
Radiation Protection16
Ventilation16
Interaction with External Devices16
2.1.10 Electromagnetic Environment and the Influence of Devices17
Control Elements and Device Displays18
Control Elements and Device Displays PROGNOST E18
Control Elements and Device Displays PROGNOST SH18
Operating Unit PROGNOST SH, Standard18
Operating Unit PROGNOST SH, TOUCH19
Control Elements and Device Displays Collimator20
Control Elements and Device Displays of X-Ray Tube20
Control Elements and Device Displays of X-Ray Generator20
Control Elements of Bucky, Grid Entity20
Control Elements and Device Displays of Vertical X-Ray System Image Receptor Stand PROVERT21
Vertical Carriage21
Control Elements and Device Displays of RAPIXX System21
Control Elements and Device Displays of CONAXX 221
Handling / Operation22
Operation with the Radiographic System22
Operation at the X-Ray System Table22
Position of Patients on the Tabletop22
Setting the X-Ray Unit on the MID Moving Bucky, Grid Entity22
Inserting a Cassette into the Cassette Tray22
Adjusting the Focus-Film Distance (FFD)22
Adjusting the Light Resp. X-Ray Field22
Exposure Preparation / Exposure Release22
Overtable Exposures23
Operation at Vertical X-Ray System Image Receptor Stand PROVERT23
Adjustment of the X-Ray Unit to the MID of a Cassette or Bucky/Grid Entity of a X-Ray System Image Receptor Stand (Vertical Center Beam)23
Adjustment of the Source to Image-Receptor Distance (SID)23
Adjustment of the Light-/ Radiation Field23
Exposure Preparation/ Release23
Operation X-Ray System Table PROGNOST E23
Operation Collimator23
Operation X-Ray Tube24
Operation X-Ray Generator24
Operation Bucky, Grid Entity24
Operation Vertical X-Ray System Image Receptor Stand PROVERT24
Operation RAPIXX System24
Operation Software24
4.10 Function of the PRS 500 E24
4.10.1 Switching On/Off the PRS 500 E24
Dosimetric Calibration (Only for PROVARIO HF)24
4.11 Exposure Automatic25
Safety and Maintenance26
Introduction26
Cleaning and Disinfection26
Cleaning26
Disinfection26
Check-Up and Maintenance27
Daily Controls (Prior to or During the Unit Operation)27
Regular Controls27
Only Original Spare Parts Are to be Used in Situations Requiring Component Replacement27
Maintenance27
Warranty27
Product Life Time27
Further Information27
Applied Parts and Parts Which Get Handled Like an Application Part28
Disposal28
Electrical Data29
Electromagnetic Compatibility (EMC) after en 60601-1-229
Guidelines and Manufacturers Declaration - Electromagnetic Interference30
Supporting Device)30
Technical Data31
Dimensions31
X-Ray System Table PROGNOST E32
Bucky, Grid Entity33
X-Ray Tube Column33
Vertical X-Ray System Image Receptor Stand33
Attenuation Equivalent33
Protection Art and Protection Class34
Automatic Cutoff Dose34
Analogue System34
Digital System34
Environmental34
Environmental Conditions During Operation34
Environmental Conditions for Shipping and Storage34
Description of Symbols, Labels and Abbreviations35
Symbols35
Identification Label37
Labels37
Position Symbols and Labels38
Abbreviations39

Protec PRS 500 E - Technical Data; Dimensions

Table of Contents

Other manuals for Protec PRS 500 E

Related product manuals