User Manual
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
4.1.1.3 Inserting a cassette into the cassette tray .................................................................................................... 22
4.1.1.4 Adjusting the focus-film distance (FFD) ........................................................................................................ 22
4.1.1.5 Adjusting the light resp. X-ray field .................................................................................................................. 22
4.1.1.6 Exposure preparation / exposure release .................................................................................................... 22
4.1.1.7 Overtable exposures ................................................................................................................................................. 23
4.1.2 Operation at vertical X-ray system image receptor stand PROVERT ................................................. 23
4.1.2.1 Adjustment of the X-ray unit to the mid of a cassette or Bucky/Grid entity of a X-ray
system image receptor stand (vertical center beam) ................................................................................................. 23
4.1.2.2 Adjustment of the source to image-receptor distance (SID) ........................................................... 23
4.1.2.3 Adjustment of the light-/ radiation field....................................................................................................... 23
4.1.2.4 Exposure preparation/ release ............................................................................................................................ 23
4.2 Operation X-ray system table PROGNOST E ................................................................................................................. 23
4.3 Operation collimator ................................................................................................................................................................... 23
4.4 Operation X-ray tube ................................................................................................................................................................... 24
4.5 Operation X-ray generator ....................................................................................................................................................... 24
4.6 Operation Bucky, Grid entity ................................................................................................................................................... 24
4.7 Operation vertical X-ray system image receptor stand PROVERT ................................................................... 24
4.8 Operation RAPIXX system......................................................................................................................................................... 24
4.9 Operation Software ...................................................................................................................................................................... 24
4.10 Function of the PRS 500 E......................................................................................................................................................... 24
4.10.1 Switching On/Off the PRS 500 E .............................................................................................................................. 24
4.10.2 Dosimetric Calibration (only for PROVARIO HF) ............................................................................................. 24
4.11 Exposure automatic ..................................................................................................................................................................... 25
5
Safety and Maintenance ................................................................................................... 26
5.1 Introduction ...................................................................................................................................................................................... 26
5.2 Cleaning and disinfection ......................................................................................................................................................... 26
5.2.1 Cleaning .................................................................................................................................................................................. 26
5.2.2 Disinfection ........................................................................................................................................................................... 26
5.3 Check-up and maintenance ................................................................................................................................................... 27
5.3.1 Daily Controls (prior to or during the unit operation) ................................................................................ 27
5.3.2 Regular controls ................................................................................................................................................................. 27
5.3.3 Only original spare parts are to be used in situations requiring component replacement
Maintenance ................................................................................................................................................................................................ 27
5.3.4 Warranty .................................................................................................................................................................................. 27
5.3.5 Product life time ................................................................................................................................................................. 27
5.3.6 Further Information ......................................................................................................................................................... 27
5.3.7 Applied Parts and parts which get handled like an application part ................................................ 28
5.3.8 Disposal ................................................................................................................................................................................... 28
6
Electrical data ..................................................................................................................... 29
6.1 Electromagnetic Compatibility (EMC) after EN 60601-1-2 ................................................................................... 29
6.1.1 Guidelines and Manufacturers declaration – electromagnetic interference (non-life
supporting device) ................................................................................................................................................................................... 30
7
Technical Data .................................................................................................................... 31
7.1 Dimensions ........................................................................................................................................................................................ 31
7.2 X-ray system table PROGNOST E .......................................................................................................................................... 32
7.3 Bucky, Grid entity ........................................................................................................................................................................... 33
7.4 X-ray tube column ........................................................................................................................................................................ 33
7.5 Vertical X-ray system image receptor stand .................................................................................................................. 33
7.6 Attenuation Equivalent .............................................................................................................................................................. 33
7.6.1 Protection Art and Protection Class ....................................................................................................................... 34
7.7 Automatic cutoff dose ................................................................................................................................................................ 34
7.7.1 Analogue System .............................................................................................................................................................. 34
7.7.2 Digital System ...................................................................................................................................................................... 34
7.8 Environmental ................................................................................................................................................................................. 34
7.8.1 Environmental conditions during operation ................................................................................................... 34
7.8.2 Environmental Conditions for Shipping and Storage ................................................................................ 34
8
Description of symbols, labels and abbreviations ....................................................... 35
To Next Page
Loading...
