Running Immunoassays page 19
User Guide for Jess
Click Start to begin the run. Jess’s status will change to Running, the Start button will change to Stop
and the Run Progress Bar will appear:
Once she’s started, Jess will run all your samples to completion in about 3 hours depending on the
assay. To check on the time remaining, click the Run Summary tab in the upper right corner of the
screen.
NOTE: Jess will continue to run even if Compass for Simple Western is closed. Always check the status light
to confirm whether Jess is performing a run.
Step 3 - Post-Run Procedures
When the run is done, you’ll need to:
1. Remove the capillary cartridge.
2. Remove the sample plate.
Capillary and sample plate disposal depends on the samples that were assayed. If you aren’t sure what your
sample origins are, we recommend used cartridges and plates be disposed of as biohazard waste.
!WARNING! SHARPS HAZARD
Capillaries may present a potential sharps hazard. Dispose of used capillaries according to your insti-
tution's sharps disposal policy.
To Next Page
Loading...
