EasyManua.ls Logo

Protelex ICM-X22 - Electricity Safety; Hygiene Standards; Installation Requirements

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.nkprotelex.com
4
Electricity
Install the earthling device according to
the National Security Standard for
electrical equipment
·Only use the feed line, method of Wiring
and equipment in conformity with the
National Security Standard for electrical
equipment.
· Be sure installing a short and leakage
protective device on the feed line.
Hygiene
·To use the machine without strict
disinfection may pollute the food which
will be dangerous to your health.
·Always keep the machine in clean
conditions.
Remove the deteriorated material
immediately away from the machine.
·Washing and disinfecting procedure must
strictly follow this Manual.
Installation
. Lay the machine on dry and firm floor. Do not lay the machine tilted. Any heat source
over 25 must be kept at least 50cm away round the machine. Keep the machine away
from rain and direct sunlight.
· Leave a space no less than 30cm on both sides of the machine for proper ventilation. To
ensure heat dissipation, leave a space at least 1.5m from the hot air exhaust outlet. Do
not leave any object which may be sucked by air flow, such as a plastic bag, near the hot
air exhaust outlet.
Connect to power source

Related product manuals