EasyManua.ls Logo

Protelex ICM-X22 - Operation and Production; General Operation

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.nkprotelex.com
5
·The power socket must have an earth line or just connect the machine metal case to the
earth.
·Power Specifications:
Single Phase: 220V/50Hz, Voltage Fluctuation: 198V-240V
Three Phase: 380V/50Hz, Voltage Fluctuation: 370V-390V
· Section area of the power conductor must be not less than 2.5mm
2
or the line may be
overloaded, the voltage dropped down which may impair or even damage the machine.
Cautions:
·To avoid any adverse effect from vibration which is unavoidable during transportation, on
arrival of the machine, leave it for 24 hours before trying to run it for the first time.
· The feed stock in the Feed Basin must be cold.
· To maintain best cooling performance of the machine, wipe off dusts from the hot air
exhaust outlet regularly.
· For machine with double drum (freezer cylinder) it is prohibited to use only one drum or
feed one drum with ice cream pulp and other drum with other material (except for
machines with double-compressor set).
· For the machine with 380V power supply, you must check if the stirrer shaft turns in
clockwise direction for the first start. If the stirrer shaft turns in opposite direction, just
exchange any two power conductors from three phases.
Notice:
Your machine is designed to produce either soft ice cream or frozen yogurt and not both
together.
Either ice cream or frozen yogurt and not one drum with ice cream and other drum with
frozen yogurt
4. Operation

Related product manuals