prowarm ProDigital - Locking;Unlocking the Thermostat

Electric Floor Model
19
Section Header
Locking the Thermostat
Unlocking the Thermostat
The ProDigital™ has a keypad lock facility. To activate the lock follow these steps.
• Use the ‘Left/Right’ keys to scroll to Hold & press
for 7 seconds .........................
The display will show 0000. At this point enter a four digit pin number.
• Use the ‘Up/Down’ keys to enter values ..............................................................................
• Use the ‘Left/Right’ keys to move between digits ...........................................................
• Press
to confirm .............................................................................................................................
The display will return to the main screen and display the keypad lock indicator....
Note: The keypad lock indicator is only displayed when the lock is active.
• To unlock the ProDigital™ press
once ...................................................................................................
The display will show 0000. At this point enter the four digit pin number you set previously.
• Use the ‘Up/Down’ keys to enter values ...........................................................................................
• Use the ‘Left/Right’ keys to move between digits ......................................................................
• Press
to confirm ...............................................................................................................................................
The display will unlock and return to the main screen.