Prowise ProLine Plus - Page 33


Choose from pre-installed colour settings or adjust the colour temperature. Depending on the chosen             
inputsource(PC,laptop,etc.),itisalsopossibletoadjusttheaspectratio.

8.2.Audio
To adjust the volume settings, select the “Audio” tab in the “Settings” menu. In this tab, use the sliders to                   
adjusttheadvancedsoundsettings.

There are a number of pre-installed sound settings to choose from and it is also possible to mute the                  
soundinthismenu.




PLEASE NOTE! The audio outputs (the analogue line output and the digital Coax port)             
are always active. If you connect an external audio device to the touchscreen and only              
wish to use this audio device, press the “Mute” button on the remote control or in the                
Centralmenutoturnoffthetouchscreen’sinternalsound.


8.3.Connectivity
Wifi

When WiFi is selected, the touchscreen searches for available WiFi networks. Connect to a WiFi network as                
follows:

1. Click‘WiFi”inthe“Settings”menu.
2. ActivatetheWiFitoggle
3. Selectthedesirednetwork.
4. Enterthepasswordforthenetwork(clicktheeyetodisplaytheenteredpassword).
5. Click“Connect”.


ManualProLine+


33

