EasyManua.ls Logo

Prowise ProLine Plus - Starting Your Device for the First Time

Prowise ProLine Plus
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UsingProwiseCentral
1. LaunchtheProwiseCentralMenubyplacingfivefingersofonehandonthescreen.
2. Openthesidebar.
3. Selectthe‘power’icon.
4. Thenotification‘Thesystemwillshutdownin15seconds’willappear.
5. Select ‘Shutdown’ to shut the touchscreen down immediately, or wait 15 seconds for the
touchscreen to shut down automatically. To abort the shutdown of your touchscreen select the
‘Cancel’button.
6. Turn off the main power supply by using the power switch on the right hand side of the
touchscreen.
CAUTION! Wait to turn off the power switch (step 6) until the LED indicator light, next
to the Pro Line+ logo, has turned red. Turning off the power switch when the system is
stillactivecancausedamagetothePCmodule.
Shutdownautomatically
When no active input source has been detected in a specific input channel, a notification will appear after
30 seconds to shut down the touchscreen. This notification will be automatically accepted after 15
secondsbythesystemandthetouchscreenwillbeshutdown.
PLEASE NOTE! Turn the touchscreen off completely when moving the screen by turning
offthepowerswitchandremovingthepowercablefromthescreen.
6.2.Startingyourdeviceforthefirsttime
The first time you start your touchscreen, a setup guide opens to help you configure the most important
settings.Followthestepsbelowtocompletethesetup:
1. Ensurethetouchscreenisconnectedtothemainspowersupply.
2. Turnonthemainpowerswitch.
3. Pressthepowerbutton(controlpanelorremotecontrol)
4. Thetouchscreenwillturnonandthesetupguidewillappear.
ManualProLine+
26

Related product manuals