3.Installation
A Prowise certified mechanic will install the Pro Line+ Multi-touchscreen on delivery and will ensure the
screen is ready for use. We do not recommend it, however if you want to install the screen yourself or by
someoneelse,thenpleasefollowthefollowingsteps:
● Donotinstallthetouchscreenalone.
● UseacertifiedProwisewallbracketwhenassemblingawallliftormobilelift.
● Pleaseensurethewallisstrongenoughtocarrytheweightofthetouchscreen.
● Connect the cables (which cables you require depend on the external devices you use or other
externalsourceslikealiftsystem).
● If you are using a PC module, ensure the module is inserted and tightened correctly. Install the PC
moduleasdescribedinthechapter‘InstallPCmodule’.
● Makesuretoonlyconnectthepowercablewhentheaboveelementshavebeenconnected.
CAUTION! Prowise can not be held responsible for any damage or injury caused by the
incorrect installation of the touchscreen done by third parties. Damage to the touchscreen,
caused by incorrect installation by third parties, will not be covered by the warranty. Always
contactProwiseoracertifiedpartnerifyouhaveanyquestionsabouttheinstallation.
3.1.Placeofinstallation
Please follow the instructions below, these will help guarantee reliable functioning and a long lifespan of
yourtouchscreen.
Keep the touchscreen and all connected devices away from moisture and avoid dust and heat. Do not
place the touchscreen near devices which produce heat or in the vicinity of water. Non-compliance with
theseinstructionscanleadtofaultsordamagetothetouchscreen.
The ProLine+ multi-touchscreen can be used at an ambient temperature from 0 °C to +38 °C (32 °F to 100,4
°F)andrelativehumidityfrom10%to90%(withoutcondensation).
When switched-off, the touchscreen can be stored at a temperature from -20 °C to 60 °C (-4 °F to 140 °F)
andrelativehumidityfrom10%to90%(withoutcondensation).
To Next Page
Loading...
