Prowise ProLine Plus - Page 8


Install the touchscreen on a stable, vibration-free surface/wall to avoid damage to the touchscreen. Make              
sure that all of the ventilation openings, located at the back of the screen, stay uncovered, so hot air can                   
escape.



WARNING! Disconnect the power cable during a thunderstorm. For extra safety, we           
recommend using an overvoltage protection device, to prevent the touchscreen from          
sustainingdamageasaresultofpowersurgesorlightningstrikes.

3.2.Cabling
Only use the power cable supplied by Prowise to connect the ProLine+ Multi-touchscreen to the mains               
power supply. The touchscreen must be placed close to the electrical outlet and the electrical outlet               
should be easy to reach. Cables should not be laid in the walkway to avoid anyone stepping on them or                   
tripping over them. Do not place any objects on the cables to avoid damaging them. Prevent electrical                
overloadswhenusingadistributingplug,asthiscanleadtoashortcircuit.

Forextrasafety,werecommendusinganovervoltageprotectiondevicetopreventthetouchscreen
fromsustainingdamageasaresultofpowersurgesorlightningstrikes.



CAUTION! Only plug the power cable into grounded electrical outlets with AC 100-240V            
~50/60Hz. If you are not sure about the power supply at the installation location, consult your               
energycompany.











ManualProLine+


8

