Prowise ProLine Plus - Page 47


11.2.2.Connectinganamplifier
Connect an amplifier by plugging it into the analogue audio output (11) or the digital Coax port (12). Use                  
theamplifier’svolumecontroltoadjusttheamplifier’svolume.






PLEASE NOTE! The audio outputs (the analogue line output and the digital Coax port)             
are always active. If you connect an external audio device to the touchscreen and only              
wish to use this audio device, press the “Mute” button on the remote control or in the                
Centralmenutoturnoffthetouchscreen’sinternalspeakers.














ManualProLine+


47

