134
Figure 4-58 Security Profile Table - Add Entries
MAC Access
The MAC Access sub-tab allows you to build a list of stations, identified by their MAC addresses, authorized to access
the network through the AP. The list is stored inside each AP within your network. Up to 1000 entries can be made in the
table.
To configure MAC Access Status for an SSID, click Configure>SSID/VLAN/Security>Wireless A or B. The MAC ACL
Status parameter configuration is available per SSID if Security Per SSID feature is enabled. The parameter gets
applied for all SSIDs when Security per SSID is disabled. Configuration of MAC ACL status is rebootable.
To Next Page
Loading...
