Proxim ORiNOCO AP-700 - B Proximunify (PXU) Management

243
AP-4000/4000M/4900M User Guide
B
ProximUnify (PXU) Management
This section discusses the MIB Parameters:
• To manage CMOB
• To manage the PXU
• To manage the Uplink VLAN ID table
To manage CMOB
* The value 1 means you can choose only one PXU Profile.
To manage the PXU
Name Type Value Access MIB Objects
Wireless Interface
SSID Table
Table N/A N/A oriWirelessIfSSIDTable
Converged Mobility
Status
Converged
Mobility Status
notsupported(0)
enable(1)
disable(2)
Default Value =
disable
RW oriWirelessIfSSIDTableCMobStatus
PXU Profile Integer32 Depends on
Configured PXU
Profiles.
Default Value = 1*
RW oriWirelessIfSSIDTablePXUProfile
Name Type Value Access MIB Objects
PXU Profile Table Table N/A N/A oriPXUProfileTable
PXU Profile Table
Entry
Table Entry N/A N/A oriPXUProfileTableEntry
Profile Index Integer32 1 RO oriPXUProfileTableIndex
Primary OR Secondary
Index
Integer32 1..2 RO oriPXUProfileTablePrimaryOrSecondar
yIndex
PXU IP Address IpAddress N/A RW oriPXUProfileTableIPAddress
Domain Name DisplayString32 1..32 characters RW oriPXUProfileTableDomainName
Shared Secret DisplayString 6..32 characters WO oriPXUProfileTableSharedSecret
Response Time Integer32 1..10
Default = 3
Units = seconds
RW oriPXUProfileTableResponseTime
Retransmissions Integer32 0..4
Default = 3
RW oriPXUProfileTableRetransmissions
Status RowStatus active(1),
notInService(2),
notReady(3)
createAndGo(4),
createAndWait(5),
destroy(6)
RW oriPXUProfileTableRowStatus