Proxim ORiNOCO AP-700 - Page 85

Advanced Configuration AP-700 User Guide
Filtering
85
Figure 4-29 Ethernet Protocol Filter Configuration
3. Configure the Ethernet Protocol Filter Table. This table is pre-populated with existing Ethernet Protocol Filters,
however, you may enter additional filters by specifying the appropriate parameters.
• To add an entry, click Add, and then specify the Protocol Number and a Protocol Name.
– Protocol Number: Enter the protocol number. See http://www.iana.org/assignments/ethernet-numbers for a
list of protocol numbers.
– Protocol Name: Enter related information, typically the protocol name.