ORiNOCO
®
802.11n Access Points - Software Management Guide 75
Click OK and COMMIT, to save the configured parameters.
AP device supports the following filters:
• Protocol Filters
• Static MAC Address Filters
• Advanced Filters
• TCP/UDP Port Filters
• Storm Threshold Filters
• Packet Forwarding
5.8.1 Protocol Filters
The Protocol Filter blocks or forwards the packets based on the protocols supported by the AP device. Navigate to
CONFIGURATION > Filters > Protocol Filters. The Protocol Filters screen appears.
Figure 5-37 Protocol Filters
Intra BSS Filtering This parameter enables you to prevent the wireless clients within a BSS from exchanging
traffic. By default, it is disabled. To configure, select Enable or Disable from the drop down
menu.
To Next Page
Loading...
Need help?
General
