ORiNOCO
®
802.11n Access Points - Software Management Guide 98
b. Click Update, to update the device with new configuration file.
c. Click Load, to apply the updated changes.
d. Click Update & Load, to update and load the configuration file onto the device.
5. To update the device with Config Profile files, select Config Profile.
Figure 6-9 Update Configuration by using TFTP - Config Profile
a. Configure the following parameters.
b. Click Upload, to upload the device with new configuration.
c. Click Apply & Reboot, to upload and automatically reboot the device.
:
• Reboot the device when you update the device with Binary Configuration file or Config Profile file.
• Update & Load the device when you update the device with Text Based Configuration file.
• It is recommended not to navigate away from the update screen while the update is in progress.
6.2.3 Retrieve from Device
6.2.3.1 Retrieve from Device by using HTTP
To retrieve Configuration files, Event Logs and Text Based Templates from the device by using HTTP, follow the following steps:
1. Navigate to MANAGEMENT > File Management > Retrieve from Device > HTTP. The configuration screen
appears.
Parameter Description
Server IP Address Enter the TFTP server IP address.
File Name Enter the config file name (along with the extension) to be updated onto the
device.
To Next Page
Loading...
Need help?
General
