ORiNOCO
®
802.11n Access Points - Software Management Guide 99
Figure 6-10 Retrieve From Device by using HTTP
2. Configure the following parameters:
Parameter Description
File Type Specifies the type of file that you want to retrieve from the device. To configure, select any
of the following File Type from the drop down menu.
– Config: Specifies the configuration files.
– Event Log: Specifies the event logs.
– Text Based Template Config: Specifies the text based template configuration files.
– Config Profile: The Config Profile is used to replicate the configuration of a master
device on similar devices. While replicating, you have an option to exclude unique
device’s parameters such as System information, IP configuration, Ethernet
configuration and Wireless configuration. By default, System Information and IP
Configuration parameters are excluded.
Select Config Profile from the File Type.
Figure 6-11 Retrieve Config Profile File via HTTP
To Next Page
Loading...
