PTW DIADOS E - Technical Manual; Device Technical Specifications

DIADOS E
T11035
Technical Manual – Technical Specifications
D616.131.00/10 en
39
Technical Manual
6 Technical Specifications
Only values with specified tolerances or limits are guaranteed. Values without tolerances are for information
only.
Device designation
PTW-DIADOS E, type 11035
Manufacturer
PTW-Freiburg
Type-approval certificate in
Germany
as: Diagnostic dosemeter
by: German National Metrology Institute (Physikalisch-
Technischen Bundesanstalt, PTB) in Braunschweig
according to: § 13 of the German Verification Act (Eichgesetz) of
March 23, 1992, (BGBl. I S. 711) in the presently relevant
version
approval sign:
23.04
03.01
issued to: PTW-Freiburg
Use
Diagnostic dosemeter acc. to IEC 61674 for dose and dose rate
measurement in diagnostic X-ray applications, for measurement
of the dose length product and the dose length product rate in CT
applications,
electrometer for current and charge measurement
Measuring mode
continuous operation
Pollution degree
II
Overvoltage category
II
Protection class
II
Electrical safety class
IEC61010-1
Electromagnetic compatibility
suitable for operation in a basic electromagnetic environment
according to IEC 61326-1
Influence of electromagnetic
disturbances
  5% of the beginning of the measuring range acc. to IEC 61674