Need help?Do you have a question about the PTW MULTIDOS and is the answer not in the manual?
Read device information. x.xx is the firmware version, u describes the radiological unit.
Lists error codes like E01, E02, E03, E06, E07, E09, E10 and their descriptions.
Start the communication program on your PC. The program must be set up correctly!
Set/Read the password protection. Parameter x: 0 = clear protection, 1 = Set protection.
Set/Read unit of measurement. Parameter x: A = Ampere, S = Gy/s, M = Gy/min, H = Gy/h
Set/Read unit of measurement. Parameter x: 1 = Ampere, 2 = Gy/s, 3 = Gy/min, 4 = Gy/h
Read device information. x.xx is the firmware version, u describes the radiological unit.
Lists error codes like E01, E02, E03, E06, E07, E09, E10 and their descriptions.
Start the communication program on your PC. The program must be set up correctly!
Set/Read the password protection. Parameter x: 0 = clear protection, 1 = Set protection.
Set/Read unit of measurement. Parameter x: A = Ampere, S = Gy/s, M = Gy/min, H = Gy/h
Set/Read unit of measurement. Parameter x: 1 = Ampere, 2 = Gy/s, 3 = Gy/min, 4 = Gy/h
General| Brand | PTW |
|---|---|
| Model | MULTIDOS |
| Category | Measuring Instruments |
| Language | English |
To Next Page
