DIAMENTOR E2
34
D651.131.00/05 en
Literature
[1] [Council Directive 93/42/EEC concerning medical devices
(Medical Device Directive - MDD)
[2] Council Directive 97/43/EURATOM on health protection of
individuals against the dangers of ionizing radiation in rela-
tion to medical exposure
[3] IEC 60601-1-2
Medical electrical equipment
Part 1-2: General requirements for basic safety and essential
performance -
Collateral Standard: Electromagnetic compatibility - Re-
quirements and tests
[4] IEC/CISPR 11
Industrial, scientific and medical (ISM) radio-frequency
equipment - Radio disturbance characteristics - Limits and
methods of measurement.
[5] IEC 60950-1
Information technology equipment - Safety
Part 1: General requirements
[6] IEC 60601-1 / ANSI/AAMI ES 60601-1/
CAN/CSA-C22.2.No.60601-1
Medical electrical equipment –
Part 1: General requirements for basic safety and essential
performance
[7] IEC 60580
Medical electrical equipment
Dose Area Product Meter
[8] IEC 62353
Medical electrical equipment –
Recurrent test and test after repair of medical electrical
equipment
[9] IEC 61000-3-2
Electromagnetic compatibility (EMC) -
Part 3-2: Limits -
Limits for harmonic current emissions (equipment input cur-
rent ≤ 16 A per phase)
[10] IEC 61000-3-3
Electromagnetic compatibility (EMC) -
Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker
in public low-voltage supply systems, for equipment with
rated current ≤16 A per phase and not subject to conditional
connection
[11] IEC 61000-4-2
Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test
[12] IEC 61000-4-3
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity
test
[13] IEC 61000-4-4
Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical
fast transient/burst immunity test
[14] IEC 61000-4-5
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques -
Surge immunity test
[15] IEC 61000-4-6
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques -
Immunity to conducted disturbances, induced by radio-
frequency fields
[16] IEC 61000-4-8
Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques -
Power frequency magnetic field immunity test
[17] IEC 61000-4-11
Electromagnetic compatibility (EMC) -
Part 4-11: Testing and measurement techniques -
Voltage dips, short interruptions and voltage variations im-
munity tests
[18] IEC 60522
Determination of the permanent filtration of X-ray tube as-
semblies
To Next Page
Loading...
