Pullmaster HL25 - Page 41

PAGE 39
* Performance specifications are based on standard hydraulic motor with 7/8 inch diameter rope.
APPENDIX A
313 REV.010201
POUNDS
(KILONEWTONS)
DRUM
CODE
CABLE DRUM SIZES
INCHES
(MILLIMETERS)
WIRE ROPE STORAGE
FEET
(METERS)
FEET/MINUTE
(METERS/MINUTE)
LINE PULL
AT MAXIMUM
PRESSURE*
BARREL
10.0 17.0 11.0 210 140 91 25000 16860 140 207 5357 3613 651 965 2.3
(254) (432) (279) (64) (43) (28) (111.2) (75.0) (43) (63) (23.8) (16.1) (198) (294) (8.7)
-2 10.0 24.0 11.0 515 398 264 25000 11757 140 297 5357 651 1384 2.3
(254) (111.2) (52.3) (43) (90) (23.8) (11.2) (198) (422) (8.7)
-3 10.0 17.0 796 615 408 25000 5357 651 3.0
(254) (23.8) (11.2) (198)
-4 10.0 22.0 1031 528 25000 5357 2519 651 1384 3.6
(254) (610) (559) (314) (243) (161) (111.2) (52.3) (43) (90) (23.8) (11.2) (198) (422) (13.6)
LUBRICATING
OIL
VOLUME
REQUIRED
U.S.
GALLON
(LITERS)
DRUM DRUM DRUM DRUM DRUM DRUM DRUM DRUM
LINE SPEED
AT MAXIMUM
VOLUME*
LINE SPEED
AT MAXIMUM
VOLUME*
MAXIMUM
ALLOWABLE
LINE PULL*
POUNDS
(KILONEWTONS)
FEET/MINUTE
(METERS/MINUTE)
BARE FULL BARE FULL BARE FULL BARE FULL
HIGH SPEED HOISTING & LOWERING
LOW SPEED HOISTING
-1
24.0
FLANGE LENGTH 3/4 inch 7/8 inch 1 inch
796
(610) (279) (157) (121) (80)
24.0
(610) (432) (243) (187) (124) (111.2) (52.3) (43) (90)
11757 140 297
1384
(422) (11.3)
11757 140 297 2519
2519