Puloon Eagle Eye 7 - Daily Maintenance; Maintenance Method

Maintenance Method
No. Check Point Maintenance Method Cycle Remarks
1 Hopper Sensor and Rollers Cleaning Daily 47 Page
2 Counterfeit Detection
sensors
Cleaning Daily 48 Page
3 Stacker sensor and Reject
Pocket sensor
Cleaning Daily 49 Page
4 Diverter sensor Cleaning Daily 50 Page
5 Dust Pocket Clean and empty the dust
pocket.
2 months 50 Page
6 Pick-Up Roller Check the status of surface
and shape
6 months
Replacement by
trained person
7 Cables and Connector Check
status of cables and
connector
6 months
Replacement by
trained person
8 Path Sensors Check the status by using
Service-Sensor Menu
6 months
Replacement by
trained person
9 Motors Check the status by using
Service-Diagnostic Menu
6 months
Replacement by
trained person
10 Timing Belt Check abnormal noise and
belt deviation
6 months
Replacement by
trained person
Maintenance
-46-
Daily Maintenance