Error Code List
No.
Reason Releasing Method
2E
error
1. Turn the power switch off and on.
2. If the error continues, please contact a local
service Center.
10
Initial Inlet Sensor Fail
1. Open the cover.
2. Check and Clean the sensors with a cloth.
11
Check R Sensors Fail
1. Check and Clean the check sensors with a cloth.
12
L Sensors Fail
13
Fail
1. Check and Clean the diverter and diverter end
sensors with a cloth.
15
Initial Diverter End Sensor Fail
16
Initial Stack Sensor Fail
1. Remove the banknotes from the stacker.
2. Check the stack sensor.
17
Initial Reject Sensor Fail
1. Remove the banknotes from the reject pocket.
2. Check the reject sensor.
18
Initial Reject Full Sensor Fail
1. Count mismatch. Please count again.
21
1. Close the upper cover.
22
1. Check the feed Motor.
23
1. Check the pickup Motor.
24
1. Turn the power off and on.
2. If the error continues, please contact a local
service Center.
25
1. Count mismatch. Please count again.
2A
1. Clean the pickup sensor and rubber.
-57-
Error & Trouble Shooting