Need help?Do you have a question about the Pulsar Axion Key and is the answer not in the manual?
General| Brand | Pulsar |
|---|---|
| Model | Axion Key |
| Category | Laboratory Equipment |
| Language | English |
Details on microbolometer type, resolution, frame refresh rate, and pixel size.
Details on magnification, digital zoom, aperture, and field of view.
Information on display type and resolution.
Details on power, battery, IP rating, temperature, and dimensions.
Description of LED indicator status for device operation.
Instructions for charging the APS3 Lithium-ion Battery Pack using various methods.
How to connect an external power source like a 5V power bank.
Steps to power up the device and adjust the image using focus and diopter.
Explanation of calibration modes (manual, semi-automatic, automatic) for image quality.
How to use the device's functionality for increasing magnification.
Accessing basic settings like brightness, contrast, and digital zoom.
Details on operating modes: FOREST, IDENTIFICATION, and ROCKS.
How to select between manual, semi-automatic, and automatic calibration.
Procedure for adjusting the brightness level of on-screen pictograms.
How to choose the interface language for the device.
Instructions for setting the device's date and time accurately.
How to select between metres and yards for measurements.
Procedure to reset device settings to their original factory state.
Steps to programmatically remove or cancel defective pixels on the sensor.
How to return previously disabled pixels to their original state.
Explanation of icons and data displayed on the status bar.
How to use the stadiametric rangefinder to determine object distance.
How to disable the display to minimize illumination and save power.
How to enable and use the PiP feature for magnified digital zoom.
How to switch between different display color palettes.
Instructions for connecting the device to a computer for power or data transfer.
Recommended checks for the device's external appearance and components.
Actions for cleaning and checking device components twice a year.
Table listing problems, possible reasons, and corrections for device operation.
To Next Page