Pulsar GD400BN - Service and Maintenance

11
Service and Maintenance
Good maintenance is essential for safe, economical operation and long service life. The maintenance schedule is below:
Maintenance Cycle
Item
Engine oil
√
Replace
√
√
√
Air Cleaner
Element
Inspection √
Clean √
Replace √
√
Clean √
Clean - Adjust
√
Clean √
Check - Adjust
√
Clean
√
Fuel Hose Inspection Every Two Years
Remove
Carbon
Deposit **
Check - Fill
** These tasks should be completed by an authorized Pulsar service center.
Every 125 hours
Cylinder Head, Piston
Fuel Tank and Fuel
Filter **
Valve Clearance **
Spark Arrester
Spark Plug
Carburetor Float
Bowl
Each
Week
Break-In
Maintenance at
1 Month or
20 Hours Use
Quarterly
Maintenance is
every 90 Days or
50 Hours Use
Annual
Maintenance
or 100 Hours
Use