EasyManua.ls Logo

Pulsar GD400BN - Spark Plug Service; Engine Oil Change Procedure; Air Filter Maintenance

Pulsar GD400BN
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Service and Maintenance
Storage and Transport
Air Filter
A dirty air filter can cause poor performance and engine damage.
Perform inspection and cleaning per the maintenance schedule
on page 11.
1. Remove screws , to remove air filter housing ;
2. Remove foam filter element ;
3. Clean foam filter element with a mild soap solution, rinse
well and let it dry
4. Place a few drops of engine oil on the foam filter element
and squeeze gently to distribute the oil film evenly
5. Reinstall the air filter element in reverse order.
1. Remove fuel tank cap and fuel tank filter screen.
2. Clean fuel tank filter screen with mild soap and hot water.
3. Allow filter screen dry thoroughly and replace it in the fuel tank.
4. Replace fuel cap tightly.
Generator Long Term Storage
1. Turn the Multi-Switch to "OFF" and allow generator to cool
completely.
2. Remove the spark plug boot to prevent accidental engine
start.
Fuel Filter Screen
NEVER approach the generator while smoking or with any ignition
source!
DANGER
MULTI-SWITCH

Related product manuals