Operation (cont’d)
15
Connecting to LPG Fuel Source
1.Locate the LPG converter on the backside of the generator
2.Attach small end of the Gas Hose to the LPG converter.
3.Connect gas hose to propane fuel source. Do not turn on propane source prior to following the steps
outlined.
Batteries produce explosive gases. Keep sparks, flames and cigarettes away
from battery. To prevent the possibility of creating a spark near the battery,
connect charging cables to battery terminals first, then to the generator. When
disconnecting, disconnect the cables at the generator first.
1. Connect the red cable with the positive terminal of the battery. Ensure
the connection is secured by using the fastener at the battery terminal.
2. Connect the black cable with the negative terminal of the battery. Ensure
Be sure to connect the Electric Start Battery to the Dual fuel Generator set
the connection is secured by using the fastener at the battery terminal.
before operation. Improper connection will cause malfunction.
Do not reverse the polarity of the terminals when charging the battery. Serious
damage to the generator and/or battery may occur. Do not attempt to connect
the battery while the generator engine is running. Disconnect the cables from
the battery while the generator is in storage.
Electric Start Battery Connection
When using the fuel as LPG, make sure that there is no gasoline in the engine.
To Next Page
Loading...
Need help?
General
