Pulsar PG10000B - Assembly; Unpacking; Packing List

9
ASSEMB
L
Y
Description Qty
Wheel
Axle
2
Supporting Leg
2
Hair pin
2
Screw
2
Unpacking
1. Place box on a level surface.
2. Remove all items from box except the generator. Make sure all items listed on the packing list are included and not
damaged.
3. Cut down the sides of box being careful to avoid hitting the generator.
4. Leave generator on box to install wheel assembly.
Packing List
Check all loose parts to the following list. Contact your dealer if any loose parts are not included.
Description Qty
Generator
1
Operator 's Manual
1
Products Warranty Card
Toolkit
Spark Plug Wrench
Combination Wrench
1
1
2
2
Washer
2
Funnel
1
(
)
Handles
2
Bushings (Flanged)
4
1
Nuts
2
8 - 10
One stage regulator
++ + + + +
+ ++ + ++ +
+ +
+
+
+
10 - 13