To Next Page
H
Heather GreenJul 27, 2025
What to do if my Pulsar Inverter engine will not start?
- MMargaret GillJul 27, 2025
If your Pulsar Inverter engine won't start, shuts down, or runs rough, try the following: * Ensure the switch is in the “ON” position. * Replace the air filter. * Clean or replace the fuel filter. * Replace the fuel. * Reconnect the spark plug wire. * Replace the spark plug. * Drain the fuel tank and replace the fuel. * Ensure the fuel valve is in the “ON” position. * Turn off the choke. * Wait 5 minutes and recrank the engine.
General
