EN
34
12 Transport and storage
Electrical wiring may only be carried out by qualified persons.
• Under no circumstances should the motor be stored at temperatures exceeding 50 °C, as this could result in
leakage of the filling fluid and premature motor failure
• Storage temperature with original motor filling up to -15 °C, with water filling at temperatures above freezing
13 Frost protection
If you will not be using the pump during the winter months, drain the water from the pump to prevent damage.
Remove the plugs from the watering and drain holes and let the water flow out freely.
Leave the plugs out of the openings until you use the pump again.
To Next Page
Loading...
