Punkt MP 01 - Security Features; Passcode and PIN Management; Automatic Keypad Locking Setup

Punkt. MP 01 Mobile Phone.
Page 29
Security.
About passcodes and PINs
To help stop other people using your
phone, set a passcode. A passcode is
a code of up to four numbers for
your phone. You can also set a PIN
for your SIM card, which stops other
people using it for calls or text
messages.
If a passcode or PIN is turned on,
you must enter it whenever you turn
your phone on.
The default passcode for your phone
is 7658. The default PIN for your
SIM card is set by your network
provider. If you do not know the
PIN for your SIM card, contact your
network provider.
Using a passcode for
your phone
Phone passcode can have up
to four numbers.
— Turning your phone passcode on
or off
1. Press .
2. Use to select Settings
and press .
3. Use to select Security
and press twice.
4. Use to select Passcode
and press .
5. Enter your phone passcode and
press . The default passcode
is 7658.
— Changing your phone passcode
1. Press .
2. Use to select Settings
and press .
3. Use to select Security
and press .
4. Use to select Phone passcode
and press .
5. Use to select Change
passcode and press twice.
6. Enter your current phone
passcode and press .
The default passcode is 7658.
7. Enter your new phone passcode
and press . You can enter up to
four numbers.
8. Enter your new phone passcode
again, then press to save.
Using a PIN for your
SIM card
The PIN for your SIM card must be
at least four numbers.
Warning: Do not try to guess the PIN
for your SIM card. If you enter the
wrong PIN three times, then
your SIM card becomes locked.
If your SIM card is locked, request a
Personal Unlocking Key (PUK) from
your network provider.
— Turning the PIN for your SIM
card on or off
1. Press .
2. Use to select Settings
and press .
3. Use to select Security
and press .
4. Use to select SIM PIN
and press twice.
5. Enter your PIN and press .
— Changing the PIN for your SIM
card
1. Press .
2. Use to select Settings
and press .
3. Use to select Security
and press .
4. Use to select
SIM PIN and press .
5. Use to select Change SIM
PIN and press .
6. Enter your current PIN
and press .
7. Enter your new PIN and
press . You must enter at least
four numbers.
8. Enter your new PIN again,
then press to save.
Setting your phone’s keypad
to lock automatically
You can set your phone’s keypad to
lock automatically after a certain
amount of time. For example, you
can set the keypad to lock after 30
seconds of inactivity.
1. Press .
2. Use to select Settings
and press .
3. Use to select Preferences
and press twice.
4. Choose how long to wait before
the keypad locks automatically.
To turn off automatic locking,
choose Never.
5. Press .