PURE SIESTA FLOW - Page 17

17
Listening to Internet Radio and more Siesta Flow Owner’s Manual v1.0
2 Wait for Siesta Flow to connect to your wireless network, which may take a minute or two.
Conf iguring IP...
A
Network Setup
DelMenu
Verifying key...
A
Setting up network
De
lM
enu
If you see the message ‘Unable to connect’ highlight and select one of the following options:
Retry connection Attempts to reconnect to the selected network using the same
encryption key or password.
Select another network Re-scans and displays the list of visible wireless networks again. You
can select a new one if, for example, you’ve moved Siesta Flow from
one location to another, eg, from home to the office.
Change key or password Allows you to enter a new WEP or WPA/WPA2 key or password
if you think you’ve made a mistake. Once you’ve done this, select
‘Retry connection’ to try to connect with the new key/password.
Change encryption mode Change the encryption mode between ‘WEP’, ‘WPA (PSK)’, ‘WPA2
(PSK)’ or ‘None’. Siesta Flow automatically detects the encryption
mode for your network, but you can change this option and
then select ‘Retry connection’ if you think the mode is specified
incorrectly.
Change IP configuration Choose between ‘DHCP’ or ‘Static’
“Help! I see Unable to connect”
3 Enter your Pure Connect registration code to access Pure Connect content. See the following
page for more information.