25
Listening to Internet Radio and more Siesta Flow Owner’s Manual v1.0
2.8 Wi-Fi settings
Tap Options in either ‘The Lounge’ or ‘Media player’ source and highlight and select ‘Wi-Fi settings’ to
view the following list of options for configuring your wireless network.
Connection wizard
Select ‘Connection wizard’ to scan for all available wireless networks and select a new one if desired.
For help with connecting to a wireless network see 2.1 Connecting Siesta Flow.
View details
Select ‘View details’ to list the following technical information about the configuration of the wireless
network that Siesta Flow is connected to:
Network name The Network Name (SSID) is shown at the top of the screen.
Encryption The encryption method is listed (WEP, WPA or WPA2).
IP address The IP address of the radio.
Net mask The configured network mask.
DNS The DNS server IP address.
Router The gateway router IP address.
Radio Name The name of the radio (see Change radio name)
MAC address The MAC address of the radio (a fixed address that identifies your hardware).
Access point The MAC address of the wireless router that the radio is connected to.
Manual setup
Select ‘Manual setup’ to manually configure your wireless network settings (for advanced users only).
Retry connection Attempts to reconnect to the selected network.
Network name Choose from ‘Scan for networks’ or ‘Enter SSID manually’ to specify a new SSID
for your wireless network.
Encryption mode Change the encryption mode between ‘WEP’, ‘WPA (PSK)’, ‘WPA2 (PSK)’ or
‘None’. Siesta Flow automatically detects the encryption mode for your network.
Only change this setting if you think the encryption mode has been specified
incorrectly.
Key or password Enter a new encryption key or password.
IP address Choose between ‘DHCP’ or ‘Static’.
Clear network settings
Select ‘Clear network settings’ and Siesta Flow will ‘forget’ all wireless networks and perform a
fresh re-scan for visible networks. Select ‘Connection wizard’ to re-scan for wireless networks. Note
that you will have to re-enter your WEP or WPA/WPA2 key or password. You have to confirm this
operation: tap Yes to confirm or No to cancel.
To Next Page
Loading...
