33
Listening to an Auxiliary device Siesta Flow Owner’s Manual v1.0
You can use Siesta Flow to amplify the music stored on a portable music player. All you need is a
3.5mm to 3.5mm auxiliary lead (not supplied).
5.1 Connecting an auxiliary device
To connect an auxiliary device
1 Connect one end of the auxiliary lead into the Headphone or Line out connector on your
portable music player.
2 Connect the other end into the ‘AUX IN’ connector on the top rear of Siesta Flow.
5.2 Selecting the Auxiliary input source
To play an auxiliary device
1 Tap Source or tap Back until the Source screen appears.
2 Highlight and select ‘Auxiliary input’ to enter Auxiliary source.
3 Tap Play and adjust the volume on the auxiliary device.
Listening to an Auxiliary device
08.15
Fri 3 Apr 2009
OK Options
AUX
5 Listening to an Auxiliary device
To Next Page
Loading...
