PWB TOOL MASTER Lite 14 User Manual

TOOL MASTER Lite 14 14 MANUAL © Evoset AG
Units Selection
The Tool Master Lite gives you the option to display measurements in inches or millimeters.
The pre-setter is set to measure in inches by default. The following steps show how to toggle
between the two unit options.
1. On the X-axis Display, press and hold the SET key for about 5 seconds to access the
Programming Menu.
2. Press SET until UNITS is displayed.
3. Toggle between inch and mm (inch and millimeter) by pressing the SET and ABS/REL keys.
Select the desired option and press ENTER to set your choice.
4. Press CLEAR several times to exit the Programming Menu. The unit selection is now
complete.
Perform the same sequence to set the unit in the Z-Axis Display.
Step 1
Step 2
Step 3 Step 4

PWB TOOL MASTER Lite 14 Specifications

General

Brand	PWB
Model	TOOL MASTER Lite 14
Category	Industrial Equipment
Language	English