TOOL MASTER Lite 14
3
MANUAL © Evoset AG
1. Items Check List
Upon receiving the Tool Master Lite 14, please check the following items are accounted for:
A. TM Lite 14 Pre-setter
B. Adaptors
C. User's Manual and Certification
D. Lubricating oil and lint-free cloth
The Pre-setter is identified by a unique Serial Number. The Identification Plate is located on the back
of the unit, and also includes the Model and Year. Please write the following information for future
reference, and in the event you need to contact Dorian Tool for support.
Model: TM Lite 14 Year: Serial No.: _____________________
Special Cautions
Please read this instructions manual prior to using the TOOL MASTER LITE 14 Pre-setter, and follow
the recommendations listed when using and handling the instrument:
• Do not place magnets or magnetic material on the magnetic bands
• Position the instrument at least 3 feet from magnetic sources
• Do not tamper with the instrument
• Use original parts only
• Do not store the pre-setter in a high-humidity environment
• Keep the pre-setter in a room where the temperature range is -3 to 38 °C
• Follow the maintenance recommendations listed in this User's Manual
To Next Page
Loading...
Need help?
General