www.PyleUSA.com
Operation Instructions
How to use the device:
1. Switch to “ON” or “OFF” to power on or power o the device.
2. Switch to “TX” (Transmitting mode), the product will search the available BT
devices automatically and the BT symbol will ashing and ’’Paring’’ shown on the
screen, when it success paired with the BT devices, the device’s BT paring name
will shown on the screen. Switch to “RX” (Receiving mode), when it success paired
with the BT devices, the device’s BT paring name will shown on the screen.
3. The product will search the available BT devices automatically. If it can’t pair the
BT devices in a long time, please press “BT” button to re-search the BT devices
and reconnect.
The product will be power o automatically if there is no Wireless BT devices can be
paired in 10 minutes, please slide the “ON/OFF” switch to reopen the adapter.
In the Transmitting (TX) mode:
1. When the adapter was paired with the Wireless BT devices, the device’s BT paring
name will shown on the screen.
2. Press and hold “<” to decrease the Volume, and Press and hold “>” to increase the
Volume.
3. Short press to begin Wireless BT device searching.
To Next Page
Loading...
