If you do not see the flickering lights - DO NOT CONTINUE
please refer to the FAQ online
https://pyleaudio.helpshift.com/a/pyle-ip/?s=general&f=the-green-and-yellow-
lights-at-the-back-of-my-camera-do-not-flash-when-plugged-into-power-and-
ethernet
5) Copy/Paste or type the link below into your Internet browser to Download the
software package online
www.pyleaudio.com/manuals/drivers/pipcam5.zip
6) Unzip the zip file and select Mac or the other folder depending on your OS
7) Open and install the “IP Camera Tool” on your PC
To Next Page
Loading...