and blinking yellow light indicating the camera is connected to your router.
If you do not see the flickering lights - DO NOT CONTINUE
Please refer to the FAQ online
https://pyleaudio.helpshift.com/a/pyle-ip/?s=general&f=the-green-and-yellow-
lights-at-the-back-of-my-camera-do-not-flash-when-plugged-into-power-and-
ethernet
Add the Camera in the Mobile App
1) Check your mobile phone is connected to WiFi
-Navigate to the system setting in your smartphone and verify you are connected
to the same wireless router that the camera is currently plugged into
2) Download the Mobile App - “Pyle IP Cam”
We have a few different Pyle Mobile apps
Make sure you get the “Pyle IP Cam” App with the gray background
The other versions will not work 100% for these camera models
To Next Page
Loading...