EasyManua.ls Logo

Pyle PLCD9MR - User Manual

Pyle PLCD9MR
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Mobile Audio System
• CD Player
PLL Synthesizer Stereo Radio
Compact Disc Player
Automatic Memory Storing
Full Detachable Panel
• Preset Equalization
Electronic Shockproof (ESP) Function
Auxiliary Input Function
Remote Control
www.pyleaudio.com
PLCD9MR

Questions and Answers

  • R
    Robert SnyderAug 9, 2025
    How to fix no power on my Pyle PLCD9MR Car Receiver?
    • N
      Nicole OrozcoAug 9, 2025
      If your Pyle Car Receiver isn't powering on, first, ensure the car ignition switch is turned to “ACC” if the power supply is connected to the car accessory circuits. If that doesn't work, check the fuse and replace it if it's blown.
  • A
    Andrew RichardAug 13, 2025
    Why is there no sound coming from my Pyle PLCD9MR Car Receiver?
    • K
      Katrina BurnsAug 14, 2025
      If you're getting no sound from your Pyle Car Receiver, first, check the volume level and adjust it to a desired level. If the volume isn't the issue, inspect the wiring connections to ensure they are properly connected.
  • H
    Hannah NealAug 19, 2025
    What to do if the radio on my Pyle PLCD9MR is not working?
    • D
      Dr. Jason JonesAug 19, 2025
      If the radio on your Pyle Car Receiver isn't working or the automatic station selection fails, ensure the antenna cable is firmly inserted. If the issue persists, the signals might be too weak, so try selecting a station manually.
  • A
    Andrew MartinAug 25, 2025
    How to fix disc loading/ejecting issues with Pyle PLCD9MR?
    • S
      Stephanie LambAug 25, 2025
      If your Pyle Car Receiver is having trouble loading or ejecting discs: - Ensure there isn't already a CD inside the player. - Make sure you're inserting the disc with the label facing upward. - Check the disc for dirt or defects; clean or replace it if necessary. - If the car's internal temperature is too high, allow it to cool down. - If condensation is the issue, leave the player off for about an hour before trying again.
  • S
    seanbarrAug 29, 2025
    What causes sound skipping on Pyle PLCD9MR?
    • C
      Christina GreenAug 29, 2025
      If the sound skips on your Pyle Car Receiver, adjust the installation angle to less than 30 degrees. Also, the disc may be dirty or defective, so try cleaning it or using a new one.
  • M
    millerjessicaSep 3, 2025
    What to do if the operation keys on my Pyle Car Receiver don't work?
    • K
      Katherine MathisSep 3, 2025
      If the operation keys on your Pyle Car Receiver aren't working, press the RESET button. It is possible that the built-in microcomputer is not operating properly due to noise.

Pyle PLCD9MR Specifications

General IconGeneral
Power Output4 x 50 Watts
BluetoothYes
USB PortYes
SD Card SlotYes
AM/FM RadioYes
Display TypeLCD
TouchscreenYes
NavigationNo
DVD PlayerNo
Steering Wheel Control CompatibleYes
Backup Camera InputYes
AUX InputYes
Microphone InputYes
Video PlaybackYes
Audio PlaybackYes
Resolution800 x 480

Related product manuals